Gen 4 CBR undertail attempt .....

i like the way the gen 6 pipe follows the triangular shapes of the tail. but that carbon one looks like something off a jet, in a good way.

 

Just post another 500 photos of your track day.

 

The first thing people will notice is the jethro'd exhaust.....

 

Your just jealous because you got gaping holes where your nice fitting pipe use to be :crazy:

 

Oh boy am I! Good luck Brian and I hope it works out well for you. I'm sure you will figure out something. :smile:

 

i voted for the carbon, but i would change it to the 6 gen in after looking at it twice.

 

From the side view the 6th IN looks better but from the back the 6th OUT looks better. :unsure:

 

Done!

Ok just a quick update that the deed is DONE! With the help of Tori I finished her up tonight. Part CBR Part Triumph, and alot of hard work. Here are some pics along the way.
I cut off the center supports and made some cardboard template for the aluminum panels.





I cut off the donut part of the stock exhaust and used an up pipe from a 6th gen exhaust and a 45 adapter pipe from Kragens.



drilled some holes to mount the muffler to the stock CBR 600rr mounts


Relocated the rear master cylinder to straight up above under the rear cowl


Had a welding shop weld the aluminum panels all together for strength, Tori welded on a rod to have a new center stand stop and welded the up pipe to the 45 degree pipe. Some BBQ black paint it was was done!





Now I need a drink!

 

Nice job I just finished up my undertail on my gen3 i started where you did and had the clearence issues so i went complete one off.

 

Looks good, Never did like the tail on the gen 3 & 4. Im interested to see all the differnt ideas on how to clean it up.

 

Well It did good on the 400 mile trip to Laguna Seca and Back. Had My full Givi Bags and girlfriend and only rubbed a few times on some larger dips. I need to get the wrench to adjust preload for next time. I really like the looks now that the muffler is up out of the way of that nice 8 spoke.

 

If I could get a nice NR tail .... Id be in Heaven!

 

Fixed some missing pics and added some info by request.

 

Looks nice, I have a spare '05 600RR exhaust in the garage too. Anyone have info on what it takes for a left exit exhaust for a 4th Gen?