5th gen something missing?

Hi guys! Don't know if this is the right section for this but could somebody fill me in about this. There must be something missing from in front of the exhaust and the chain? The rear brake lever is only attached with one bolt??? Then there is the handlebars that have been just moved up a notch, is this safe? Thanks!

-Andy

 

Looks like you're missing a heat shield and the chain guard. You can move the handlebars down to be safe.

 

The bars are ok, no big deal there. I'll go look at my brake assy.

Yes, you are missing the top bolt for the brake assy.

 

Alright. Have to look for some of those. Damn, when I bought the bike I was happy as hell but now I find stuff missing... I wonder if someone makes these heat guards in carbon?

 

You are missing two pieces of plastic. one is the chain gurad the other I do not know the name. You can do to a online vendor that sells parts and check the micro fiche. Beeverdam honda has a online micro fiche.

 

also check servicehonda.com for OEM parts

 

Forks dropped through the triple clamps like that your Gen 5 must feel like an Easy Rider chopper, raise the fork tubes through the triple clamps 5 to 10mm below the circlip mark for much sportier steering. :thumbsup:

 

Thanks, will do.

 

I think Thurn makes a CF heat shield. Here's their eBay store: eBay Store - HONDA CBR 600 CBR 900 CBR 1000 RR VFR 750 VFR 800 VTR 1000:

 

hell ride it!! :thumbsup:

 

just pound out some beer cans drill holes in them wrap with aluminum foil all good new heat shield..........